 |
 |
| SBI-7125W-S6 |
- Processor Blade SBI-7125W-S6 (Black)
|
| |
|
Super B7DW3 |
| |
|
| CPU |
- Dual 771-pin LGA Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Quad-Core Intel®
Xeon®Processor
5400/5300 sequence
(Harpertown
/Clovertown processor)
up to 3.2 GHz
- Dual-Core Intel®
Xeon®Processor 5200/5100/5000
sequence (Wolfdale
/Woodcrest/Dempsey processor) up to 3.40 GHz
|
| System Bus |
- 1600 / 1333 / 1066 MHz system bus
|
| Operating System Software |
- Supports 64-bit Operating Systems
- Supports 32-bit Operating Systems
|
| |
|
| Memory Capacity |
- Eight 240-pin DIMM sockets
- Supports up to 64 GB 800* / 667 / 533MHz DDR2 ECC FB-DIMM memory
- Dual branch memory bus
- Memory must be populated in pairs
|
| Memory Type |
- 800* /667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 512 MB, 1GB, 2GB, 4GB, 8GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
| |
|
| Chipset |
- Intel® 5400 (Seaburg) chipset
- MCH + ESB2
|
| Infiniband Support |
- 4x DDR (20Gb/s) Infiniband mezzanine HCA (Optional)
|
| SAS |
- LSI SAS 1078
- RAID 0, 1, 5, 6, 10, 50, 60 support
|
| IPMI |
- Support for Intelligent Platform Management Interface (IPMI) v.2.0 via Chassis Management Module (CMM)
- (Optional: AOC-SIMBL)
|
| Network Controllers |
- Intel® (ESB2) 82563EB Dual-Port Gigabit Ethernet PHY Controller
- Intel® I/OAT support for fast, scaleable, and reliable networking
|
| Graphics |
- ATI ES1000 controller with 16 MB of video memory
|
| Super I/O |
|
| Clock Generator |
|
| |
|
| BIOS Type |
- 16Mb Flash EEPROM with Phoenix® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.1
- PCI 2.2
- ACPI 2.0
- USB Keyboard support
- Hardware BIOS Virus protection
|
|
|
|
|
| Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| |
|
| Buttons |
- Power On/Off button
- KVM button
|
| LEDs |
- Power LED
- UID / KVM LED
- Network Activity LED
- Fault LED
|
| Connector |
- SUV (Serial/USB/Video) & KVM Connector
|
| |
|
| Hot-swap |
- 6x 2.5" SAS/SATA Hot-swap drive bays
|
| |
|
| KVM |
- 1 Front Connector for MDS Micro KVM Card
|
| SIMBL |
|
| |
| Environmental Spec. |
- Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
| |
| United States / Canada |
- FCC- Emissions (US) Verification
|
| Europe |
- EN55022 - Emissions
- EN55024 - Immunity
- EN61000-3-2 - Harmonics
- EN61000-3-3 - Voltage Flicker
- CE - EMC Directive 89/336/EEC
|
| |
| United States / Canada |
- UL60950-1 - CSA/CUL 60950-1
|
| Europe |
- EN60950-1, CE - Low Voltage Directive 73/23/EEE
|
| Germany |
|
|
