 |
mSeries Servers
1U
2U
4U
ecoSeries Servers
1U
2U
4U
|
QV-BTF
MDS Micro QuadV Servers: The world's first and only mini blade with industry leading power consumption
The MDS Vseries Family is truly revolutionary. With four nodes in a 2U space, the new 2U Twin² delivers world-class energy efficiency and performance in a small but powerful package. Built with independent full-function system control and management, each node is contained in a convenient module design for easy system upgrade,
installation and maintenance. Optimized redundant power and cooling make the MDS QUADv the best choice for HPC, datacenter and low-cost blade applications. Together with the award-winning DUALv systems, MDS Micro offers the most advanced and complete HPC solutions in the world.
|
|
 |
| 4 Integrated Boards |
|
|
|
|
|
Key Features
Four hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:
1. DDual Intel® 5500 series Xeon® Quad/
Dual-Core, with QPI up to 6.4 GT/s
2. Up to 48GB DDR3 1333/ 1066/ 800MHz
ECC Registered DIMM / 24GB Unbuffered DIMM
3. 1 (x16) PCI-E (Low Profile)
4. Integrated IPMI 2.0 with KVM and
Dedicated LAN
5. Intel® 82576 Dual-Port Gigabit
Ethernet Controller
6. 3x Hot-swap SATA Drive Bays
7. 1200W Gold-level High-efficiency
Power Supply
|
|
|
| |
|
|
|
 |
| SYS-6026TT-BTF |
SuperServer 6026TT-BTF (Black)
|
| |
|
| 4x Super X8DTT-F |
| |
|
| CPU
|
Dual 1366-pin LGA Sockets
Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Quad-Core Intel®
- Xeon®Processor 5500 sequence (Nehalem-EP processor)
NOTE: Support processors with Max TDP < 100W
|
| QPI |
up to 6.4 GT/s
|
| |
|
| Memory Capacity |
12x 240-pin DIMM sockets
Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC Unbuffered memory
Memory Mirroring supported
|
| Memory Type |
1333 / 1066 / 800MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
1GB, 2GB, 4GB
|
| Memory Voltage |
1.5 V
|
| Error Detection |
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
|
|
| Chipset |
Intel® 5520 (Tylersburg) chipset
ICH10R + IOH-36D
|
| SATA |
Intel ICH10R SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support
|
| IPMI |
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Winbond® WPCM450 BMC |
| Network Controllers |
Intel® 82416 Dual-Port Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Intel® I/OAT 3 support for fast, scaleable, and reliable networking
VMDq support for better performance of virtualization
1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Graphics |
Matrox G200eW 8 MB DDR2
|
| Super I/O |
Winbond W83527HG chip
|
| Clock Generator |
932S421 chip
|
|
|
| Serial ATA |
Six Serial ATA ports
3 SATA hard drives supported
|
| LAN |
2x RJ45 LAN ports
1x RJ45 Dedicated IPMI LAN port
|
| USB |
2 rear + 1 header (2 Ports)
4 total USB ports, 2.0 Compliant / 1.1 Compliant
|
| VGA |
1x VGA Port
|
| Serial Port |
1 Fast UART 16550 serial port
|
| |
|
| BIOS Type |
32Mb SPI Flash EEPROM with AMI® BIOS
|
| BIOS Features |
Plug and Play (PnP)
PCI 2.2
ACPI up to 3.0
USB Keyboard support
|
|
|
|
|
| Form Factor |
2U Rackmount |
| Model |
CSE-827B-R1200B
|
| |
|
| Height |
3.5" (89mm)
|
| Width |
17.2" (437mm)
|
| Depth |
28.5" (724mm)
|
| Gross Weight |
85 lbs (38.6kg)
|
| Available Colors |
Black
|
| |
|
| Buttons |
Power On/Off button
UID button
|
| LEDs |
Power LED (on power button)
UID LED (on UID button)
Network activity LED
System Overheat/fan fail/power fail/ LED
|
| |
|
| PCI-Express |
1 (x16) PCI-E ( Low Profile)
|
| |
|
| Hot-swap |
3x 3.5" SATA Hot-swap drive bays |
| |
|
|
2U Hard drive Backplane |
| |
|
| Fans |
4x Cooling Fans |
| |
|
| 1200W high-efficiency power supply with PMBus |
| AC Input |
100 - 140V, 50 - 60Hz, 7.5 - 11Amp
180 - 240V, 50 - 60Hz, 5 - 8Amp |
DC Output
+5V standby |
4 Amp |
DC Output
+12V |
74 Amp @ 100-140V
100 Amp @ 180-240V
|
| Certification |
80 PLUS Gold Certified
|
| |
|
| CPU |
Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
CPU Core 6-Phase-switching voltage regulator
|
| FAN |
Total of four 4-pin PWM fans
4x fans with tachometer monitoring
Status monitor for speed control
Status monitor for on/off control
Low noise fan speed control
|
| Temperature |
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 4x Fan Connectors
PSU I2C temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI
|
| LED |
Power Fail / Overheat LED
Suspend-state Indicator LED
UID LED
|
| Other Features |
SDDC Support
|
| |
| RoHS |
RoHS Compliant |
| Environmental Spec. |
Operating Temperature: 10°to 35°C (50°to 95°F)
Non-operating Temperature: -40°to 70°C (-40°to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
|
|
|
|
