 |
mSeries Servers
1U
2U
4U
ecoSeries Servers
1U
2U
4U
|
m4535+ 8045c-3rb
MDS mSeries Servers
Achieving new levels of computing performance, MDS's servers offer customers high compatibility and an advanced system architecture ideal for any environment. Redundant components and exceptional cooling design provide customers with maximum system uptime.
|
|
 |
| Integrated Board |
|
|
|
|
|
Key Features
1. Quad Intel® 64-bit Xeon® MP
Support 1066 MHz FSB
2. Up to 192GB DDR2 ECC FB-DIMM
3. 1 (x8) PCI-e (using x16 slot),
1 (x8) PCI-e (using x8 slot) &
1 (x4) PCI-e (using x8 slot)
1x 64-bit 133MHz PCI-X
4. Intel® 7300 (Clarksboro) Chipset
5. LSI 1068e Dual Channel 8-Port
SAS Controller
5. 5 x 3.5" Hot-swap SAS/SATA Drive Bays
6. Intel® 87575EB Dual-port
Gigabit Ethernet Controller
7. 1200W High-efficiency Redundant
Hot-swap Power Supply |
|
|
| |
|
|
|
 |
| SYS-8045C-3RB |
- SuperServer 8045C-3RB (Black)
|
| |
|
Super X7QC3 |
| |
|
| CPU |
- Quad 604-pin FC-PGA6 Sockets
- Supports up to four Intel® 64-bit Xeon® MP processor(s) of the same type below:
- 6-Core Intel® Xeon®
Processor 7400 sequence
- Quad-Core Intel® Xeon®
Processor 7300 sequence
- Dual-Core Intel® Xeon®
Processor 7200 sequence
|
| System Bus |
|
| Operating System Software |
- Supports 64-bit Operating Systems
- Supports 32-bit Operating Systems
|
| |
|
| Memory Capacity |
- Twenty-four 240-pin DIMM sockets
- Supports up to 192 GB 667 / 533MHz DDR2 ECC FB-DIMM memory
- Quad branch memory bus
- Memory must be populated in pairs
- Memory Mirroring supported
|
| Memory Type |
- 667 / 533MHz FB-DIMM (Fully Buffered DIMM) DDR2 ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
| |
| Chipset |
- Intel® 7300 (Clarksboro) chipset
- ESB2
|
| SAS |
- LSI 1068E Serial-Attached SCSI (SAS) Controller
- SAS Dual-Channel (internal)
- Each SAS channel supports up to 4 SAS / SATA drives for a total of up to 8 SAS or SATA hard drives
- Host RAID 0, 1, & 10 support (Optional RAID 5 w/ AOC-iButton68)
- SGPIO
|
| SATA |
- Intel ESB2 SATAII Controller
- RAID 0, 1, 5, 10 support (Windows)
- RAID 0, 1, 10 support (Linux)
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- 200-pin IPMI slot (SIMSO)
- (Optional: AOC-SIMSO(+))
- For Dedicated LAN, cable CBL-0177L must be used (cable sold separately)
|
| Network Controllers |
- Intel® 82575EB Dual-Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT support for fast, scaleable, and reliable networking
|
| Graphics |
- ATI ES1000 controller with 32 MB of video memory
|
| Super I/O |
|
| Clock Generator |
|
| |
|
|
| SAS |
|
| Serial ATA |
|
| IDE |
- Single EIDE channel supports up to two UDMA IDE devices(IDE-M, IDE-S) including CF card
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
- Compact Flash (40-pin connector, IDE 1, single channel) slot
|
| Floppy |
- 1 Floppy controller; 1.44 MB, 2.88 MB
|
| LAN |
|
| USB |
- 2x USB rear ports
- 3x USB internal header
- 5 total USB ports, 2.0 Compliant / 1.1 Compliant
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Port / Header |
- 1 Fast UART 16550 serial port
- 1 Header
|
| |
|
| BIOS Type |
- 8Mb Flash EEPROM with AMI ® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.2
- ACPI 1.0/2.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 2.3
|
|
|
|
|
| Form Factor |
- Tower / 4U Rackmountable
- Optional Rackmount Kit
(MCP-290-00001-00)
|
| Model |
|
| |
|
| Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| |
|
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Fail LED
- Power Fail LED
|
| Ports |
|
| |
|
| Hot-swap |
- 5x 3.5" SAS / SATA Hard Drives
- Additional three 3.5" SAS/SATA Hard Drives available with optional M35 Mobile Rack
|
| Peripheral Bay(s) |
- 2x 5.25" Peripheral Drive Bay
- 1x 5.25" Bay For Floppy Drive
|
| |
|
| Floppy |
|
| |
|
| PCI-Express |
- 1 (x8) PCI-e (using x16)slot
- 1 (x8) PCI-e (using x8) slot
- 1 (x4) PCI-e (using x8) slot
|
| PCI-X |
- 1x 64-bit 133MHz PCI-X (3.3V) slots
|
| |
|
| SAS/SATA Hard Drive Backplane |
| |
|
| Fans |
- 3x 5000 RPM Hot-Swappable Cooling Fans
- 3x 5000 RPM Hot-Swappable Rear Exhaust Fan
|
| Shrouds |
|
| |
|
| Two hot-swap high-efficiency 1200W power supply w/ PFC |
| AC Voltage |
- 100 - 240V, 50 - 60Hz, 6 - 15Amp
|
| +5V |
|
| +5V standby |
|
| +12V |
|
| -12V |
|
| +3.3V |
|
| |
|
| CPU |
- Monitors for CPU Cores,+1.8V, +3.3V, +5V, ±12V, +3.3V Stdby, +5 Stdby, VBAT, HT, Memory, Chipset
- CPU Core 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
| FAN |
- Total of nine 4-pin fans
- 9x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support for 3-pins (w/ speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 9x Fan Connectors
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- CPU / System Overheat LED
- Suspend-state Indicator LED
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
- Chipkill Support
|
| |
| Environmental Spec. |
- Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
|
|
|
 |
|
|
|
|
|
| |
Part Number |
Qty |
Description |
| Motherboard / Chassis |
MBD-X7QC3
CSE-748S-R1200B |
1
1 |
Super X7QC3 Motherboard
4U SC748S-R1200B Black Chassis |
| Air Shroud |
CSE-PT0125 |
1 |
Air Shroud |
| Backplane |
CSE-SAS-M35TQ |
1 |
SAS/SATA Hard Drive Backplane |
| Cable(s) |
CBL-0051L
CBL-0084
CBL-0087
CBL-0097L-02
CBL-0209L |
1
1
1
2
1 |
60cm Round Floppy Cable
16-pin Front Control Split Connector
20" 16-pin to 16-pin Round Ribbon Cable
50cm IPASS to 4 SATA Cable
210mm 4-pin to 3-pin Fan Power Cable |
| Drive Bay(s) |
CSE-PT36-B0
CSE-M35TQ |
3
1 |
5.25" Black Dummy Tray with Rail
5-Drive Disk Array Mobile Rack |
| Driver Disk |
CDR-INTC-Q |
1 |
Driver CD |
| Fan(s) |
FAN-0081
FAN-0090 |
3
3 |
5000 RPM Rear Cooling Fan
5000 RPM Housing Fan |
| Heatsink Components |
SNK-P0029P |
4 |
Custom Passive Heatsink for Intel Quad |
| I/O Shield |
CSE-PT55L |
1 |
Color I/O Shield with Gasket |
| Peripheral Drives |
FPD-PNSC-01 |
1 |
3.5" 1.44MB Black Floppy Drive |
| Power Supply |
PWS-1K22-1R
MCP-250-00003-00
PDB-PT748-8824 |
2
1
1 |
SP1K22-1R 1200W Redundant Power Module
SC748 Dummy Power Supply Cover
Power Distributor Board |
| Retention Module / Bracket |
BKT-0021L |
2 |
CPU Bracket for X7QC3 Motherboard |
|
|
|
|
|
| |
Part Number |
Qty |
Description |
| IPMI Add-on Cards |
AOC-SIMSO
AOC-SIMSO+
CBL-0177L |
-
-
- |
IPMI 2.0 with Virtual Media Over LAN & Dedicated LAN
IPMI 2.0 with Virtual Media Over LAN, Dedicated LAN & KVM Over LAN
Cable CBL-0177L is required to support dedicated LAN |
| Mounting Rails |
MCP-290-00001-00 |
- |
SC748 4U Chassis Mounting Rails |
|
|
|
|
