 |
mSeries Servers
1U
2U
4U
ecoSeries Servers
1U
2U
4U
|
ECO602
MDS ecoSeries
The ecoSeries boast the highest performance per watt in the industry with support for up to 192GB of fully buffered DDR2 667 memory in 24 DIMM slots. These quad-processor servers are designed for enterprise computing applications such as virtualization, high performance computing cluster (HPCC) and explicitly parallel instruction computing (EPIC).
|
|
 |
| Integrated Board |
|
|
|
|
|
Key Features
1. Quad Intel® 64-bit Xeon® MP
Support 1066 MHz FSB
2. Up to 192GB DDR2 ECC FB-DIMM
(Fully Buffered DIMM)
3. 1 (x8) PCI-e (using x16 slot),
1 (x8) PCI-e (using x8 slot) &
1 (x4) PCI-e (using x8 slot)
1x 64-bit 133MHz PCI-X
Low-profile Add-on Cards Only
4. Intel® 87575EB Dual-port
Gigabit Ethernet Controller
5. LSI 1068e Dual Channel 8-Port
SAS Controller
6. 6 x 3.5" Hot-swap SAS Drive Trays
with SES2
7. 1200W High-efficiency Redundant
Power Supply
8. ATI ES1000 32MB PCI graphics controller
|
|
| Available Colors: |
Black  |
|
 |
|
|
|
|
|
 |
| SYS-8025C-3RB |
- SuperServer 8025C-3RB (Black)
|
| |
|
| CPU |
- Quad 604-pin FC-PGA6 Sockets
- Supports up to four Intel® 64-bit Xeon® MP processor(s) of the same type below:
- 6-Core Intel® Xeon®
Processor 7400 sequence
- Quad-Core Intel® Xeon®
Processor 7300 sequence
- Dual-Core Intel® Xeon®
Processor 7200 sequence
|
| System Bus |
|
| Operating System Software |
- Supports 64-bit Operating Systems
- Supports 32-bit Operating Systems
|
| |
|
| Memory Capacity |
- Twenty-four 240-pin DIMM sockets
- Supports up to 192 GB 667 / 533MHz DDR2 ECC FB-DIMM memory
- Quad branch memory bus
- Memory must be populated in pairs
- Memory Mirroring supported
|
| Memory Type |
- 667 / 533MHz FB-DIMM (Fully Buffered DIMM) DDR2 ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
| |
| Chipset |
- Intel® 7300 (Clarksboro) chipset
- ESB2
|
| SAS |
- LSI 1068E Serial-Attached SCSI (SAS) Controller
- SAS Dual-Channel (internal)
- Each SAS channel supports up to 4 SAS / SATA drives for a total of up to 8 SAS or SATA hard drives
- Host RAID 0, 1, & 10 support (Optional RAID 5 w/ AOC-iButton68)
- SGPIO
|
| SATA |
- Intel ESB2 SATAII Controller
- RAID 0, 1, 5, 10 support (Windows)
- RAID 0, 1, 10 support (Linux)
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- 200-pin IPMI slot (SIMSO)
- (Optional: AOC-SIMSO(+))
- For Dedicated LAN, cable CBL-0177L must be used (cable sold separately)
|
| Network Controllers |
- Intel® 82575EB Dual-Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT support for fast, scaleable, and reliable networking
|
| Graphics |
- ATI ES1000 controller with 32 MB of video memory
|
| Super I/O |
|
| Clock Generator |
|
| |
|
|
| SAS |
|
| Serial ATA |
|
| IDE |
- Single EIDE channel supports up to two UDMA IDE devices(IDE-M, IDE-S) including CF card
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
- Compact Flash (40-pin connector, IDE 1, single channel) slot
|
| Floppy |
- 1 Floppy controller; 1.44 MB, 2.88 MB
|
| LAN |
|
| USB |
- 2x USB rear ports
- 3x USB internal header
- 5 total USB ports, 2.0 Compliant / 1.1 Compliant
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Port / Header |
- 1 Fast UART 16550 serial port
- 1 Header
|
|
|
|
|
| Form Factor |
|
| Model |
|
| |
|
| Height |
3.5" (89mm) |
| Width |
17.2" (437mm) |
| Depth |
27.75" (705mm) |
| Gross Weight |
53 lbs (24.0kg) |
| Available Colors |
Black |
| |
|
| Buttons |
• Power On/Off button
• System Reset button |
| LEDs |
• Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat / Fan Fail LED
• Power fail LED |
| Ports |
2x USB Ports + DB9 COM Port |
| |
|
| PCI-Express |
- 1 (x8) PCI-e (using x16) low-profile slot
- 1 (x8) PCI-e (using x8) low-profile slot
- 1 (x4) PCI-e (using x8) low-profile slot
|
| PCI-X |
- 1x 64-bit 133MHz PCI-X (3.3V) low-profile slot
|
| |
|
| Hot-swap |
- 6 x 3.5" Hot-swap SAS drive trays
|
| |
|
| DVD-ROM |
Slim 8x DVD, 24x CD, DVD-ROM Drive |
| Floppy |
Slim 1.44MB Floppy Drive (Optional) |
| |
|
| 1x SAS / SATA backplane |
| |
|
| Fans |
|
| Shroud |
|
| |
|
| Two hot-swap high-efficiency 1200W power supply w/ PFC |
| AC Voltage |
- 100 - 240V, 50 - 60Hz, 6 - 15Amp
|
| +5V |
|
| +5V standby |
|
| +12V |
|
| -12V |
|
| +3.3V |
|
| |
|
| BIOS Type |
- 8Mb Flash EEPROM with AMI ® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.2
- ACPI 1.0/2.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 2.3
|
| |
|
| CPU |
- Monitors for CPU Cores,+1.8V, +3.3V, +5V, ±12V, +3.3V Stdby, +5 Stdby, VBAT, HT, Memory, Chipset
- CPU Core 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
| FAN |
- Total of nine 4-pin fans
- 9x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support for 3-pins (w/ speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 9x Fan Connectors
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- CPU / System Overheat LED
- Suspend-state Indicator LED
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
- Chipkill Support
|
| |
| Environmental Spec. |
- Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
|
|
|
 |
|
|
|
|
|
| |
Part Number |
Qty |
Description |
| Motherboard / Chassis |
MBD-X7QC3-O-P
CSE-828TQ-R1200LPB |
1
1 |
Super X7QC3 Motherboard
2U Black Chassis |
| Air Shroud |
MCP-310-80801-0N |
1 |
2U Air Shroud |
| Backplane |
BPN-SAS-828TQ |
1 |
SAS / SATA Backplane with AMI MG9072 Chip |
| Cable(s) |
CBL-0188L
CBL-0222L |
2
1 |
64cm IPASS to 4 SATA Cable
65cm 16-pin to 16-pin Front Control Flat Cable |
| CD |
CDR-INTC-Q |
1 |
Driver CD |
| Drive Tray(s) |
MCP-220-00001-01
MCP-220-00007-01 |
6
1 |
Black Hot-swappable Hard Drive Tray
Black Front USB Assembly Tray |
| Fan(s) |
FAN-0099L |
6 |
2U 6500 RPM Cooling Fan |
| Heatsink / Retention |
SNK-P0029P |
4 |
Please refer to our Thermal Components Matrix |
| I/O Shield |
CSE-PT55L |
1 |
I/O Shield For Dual LAN Motherboard |
| Mounting Rails |
MCP-290-00013-00 |
1 |
SC828 2U Chassis Mounting Rails |
| Peripheral Drives |
DVM-PNSC-824B |
1 |
Black Panasonic 8x DVD, 24x CD, DVD-ROM Drive |
| Power Supply |
PWS-1K22-1R
PDB-PT828-8824 |
2
1 |
1200W Power Supply
Power Distributor |
|
|
|
|
|
| |
Part Number |
Qty |
Description |
| IPMI Add-on Cards |
AOC-SIMSO
AOC-SIMSO+
CBL-0177L |
-
-
- |
IPMI 2.0 with Virtual Media Over LAN & Dedicated LAN
IPMI 2.0 with Virtual Media Over LAN, Dedicated LAN & KVM Over LAN
Cable CBL-0177L is required to support dedicated LAN |
| Peripheral Drives |
FPD-CITZN-SB |
1 |
1.44MB Black Slim Floppy Drive |
|
|
|
|
