 |
mSeries Servers
1U
2U
4U
ecoSeries Servers
1U
2U
4U
|
m1825 1025w-ub
MDS mSeries Servers
Achieving new levels of computing performance, MDS's servers offer customers high compatibility and an advanced system architecture ideal for any environment. Redundant components and exceptional cooling design provide customers with maximum system uptime.
|
|
 |
| Integrated Board |
|
|
|
|
|
Key Features
1. Dual Intel® 64-bit Xeon® Quad-Core or
Dual-Core, with 1600 / 1333 / 1066 MHz
FSB
2. Up to 64GB DDR2 800 / 667 / 533
SDRAM Fully Buffered DIMM
(FB-DIMM) 1.8V or 1.5V supported
3. Left Slot (Full-height / Full-length):
1 Universal I/O (UIO) AND
1 (x8) PCI-Express (Gen 2.0)
4. Right Slot (Low-Profile w/ 5.5" length):
1 (x8) PCI-Express (Gen 2.0)
5. Intel® 82575EB Dual-port
Gigabit Ethernet Controller w/ IOAT
6. 8 x 2.5" Hot-swap Drive Bays,
For Customizable Storage
7. 560W High-efficiency Power Supply
|
|
| Available Colors: |
Black  |
|
 |
|
|
|
|
|
 |
| SYS-1025W-UB |
- SuperServer 1025W-UB (Black)
|
| |
|
Super X7DWU |
| |
|
| CPU |
- Dual 771-pin LGA Sockets
- Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below:
- Quad-Core Intel®
Xeon®Processor
5400/5300LV sequence (Harpertown
/Clovertown processor)
up to 3.20 GHz
- Dual-Core Intel®
Xeon®Processor
5200/5100LV sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz
|
| System Bus |
- 1600 / 1333 / 1066 MHz system bus
|
| |
|
| Memory Capacity |
- Eight 240-pin DIMM sockets
- Supports up to 64 GB 800* / 667 / 533MHz DDR2 ECC FB-DIMM memory
- Dual branch memory bus
- Memory must be populated in pairs
- Memory Sparing supported
|
| Memory Type |
- 800* / 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256MB, 512MB, 1GB, 2GB, 4GB, 8GB**
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
| |
|
| Chipset |
- Intel® 5400 (Seaburg) chipset
- MCH + ESB2
|
| SATA |
- Intel ESB2 SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support (Windows only)
- RAID 0, 1, 10 support (Linux)
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0 / 1.5
- 200-pin IPMI slot (SIMSO(+))
- (Optional: AOC-SIMSO(+))
- For Dedicated LAN, cable CBL-0177L must be used (cable sold separately)
|
| Network Controllers |
- Intel® 82575EB Dual-Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT support for fast, scaleable, and reliable networking
|
| Graphics |
- ATI ES1000 controller with 32 MB of video memory
|
| Super I/O |
|
| Clock Generator |
|
| |
|
| Serial ATA |
- Six Serial ATA ports
- Six SATA hard drives supported
|
| IDE |
- Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card
- Compact Flash (40-pin connector, IDE 1, single channel) slot
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy |
- 1 Floppy controller; 1.44 MB
|
| LAN |
|
| USB |
- 2x USB rear ports
- 3x USB internal headers
- Total 5 USB 2.0 Compliant / 1.1 Compliant
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Port / Header |
- 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header
|
|
|
|
|
| Form Factor |
|
| Model |
|
| |
|
| Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| |
|
| Buttons |
- Power On/Off button
- System Reset button
- UID button
|
| LEDs |
- Power status LED
- HDD activity LED
- 2x Network activity LEDs
- Universal Information (UID) LED
|
| |
|
| Left Slot |
- 1 Unversal I/O (UIO) Slot AND
- 1 (x8) PCI-e (Gen 2.0) Slot
|
| Right Slot |
- 1 (x8) PCI-e (Gen 2.0) Slot (Low profile size w/ 5.5" length)
|
| |
|
| Hot-swap |
- 8x Hot-swap 2.5" SAS / SATA HDD trays (w/ optional UIO SAS controller card)
|
| |
|
| 1x 1U SAS / SATA backplane |
| |
|
| DVD-ROM |
- Slim DVD-ROM drive (optional)
|
| |
|
| Fans |
- 4x Cooling Fans
- 2x Optional cooling fans for add-on cards
|
| Shroud |
|
| |
|
| 560W AC to DC power supply w/ PFC I2C |
| AC Voltage |
- 100-240 V, 50-60 Hz, 6.5-2.6 Amp
|
| +5V |
|
| +5V standby |
|
| +12V |
|
| -12V |
|
| +3.3V |
|
| Certification |
80 PLUS Silver Certified
[Test Report] |
| |
|
| BIOS Type |
- 8Mb Flash EEPROM with Phoenix® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
|
| |
|
| BIOS Type |
- 16Mb Flash EEPROM with Phoenix® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
| |
|
RoHS
|
- RoHS Compliant 6/6, Pb Free
|
| Environmental Spec. |
- Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
|
|
|
 |
|
|
|
|
|
| |
Part Number |
Qty |
Descriptin |
| Motherboard / Chassis |
MBD-X7DWU-O-P
CSE-113TQ-560UB |
1
1 |
Super X7DWU Motherboard
1U SC113 Chassis (B = Black) |
| Air Shroud |
MCP-310-00002-01 |
1 |
Cooling Air Shroud |
| Backplane / Drive Trays |
BPN-SAS-113TQ
MCP-220-00047-0B |
1
8 |
1U, 2.5" HDD backplane
2.5" SAS / SATA HDD Tray |
| Cable(s) |
CBL-0139L
CBL-0160L
CBL-0188L
CBL-0191L |
1
1
1
1 |
50cm 80-Wire IDE (DVD-ROM) Cable
Power Cord
IPASS(SFF-8087) to 4 SATAStraight w/Sideband , 64-cm, Pb free
50cm 20-pin to 20-in Control Cable |
| CD |
CDR-X7 |
1 |
Driver CD |
| Fan(s) |
FAN-0086L4
CSE-PT0100
CSE-PT0135 |
4
2
1 |
4-pin Cooling Fan
Dummy Fan
Fan Holder |
| Hard Drive |
MCP-220-00047-0B |
8 |
Hot-swappable Hard Drive Trays (01 = Black) |
| Heatsink / Retention |
SNK-P0017 |
2 |
Please refer to our Thermal Components Matrix |
| Mounting Rails |
CSE-PT51L |
1 |
1U Mounting Rail Kit |
| Power Supply |
PWS-562-1H20
PDB-PT815-CN20 |
2
1 |
560W 1U power supply
Power Distributor |
| Riser Card |
RSC-R1UU-E8R+
RSC-R1UU-UE8 |
1
1 |
1U 1-Slot PCI-E (x8) - (Low Profile) Right Side
1U 2-Slot PCI-E (x8) + UIO Slot - Left Side |
|
|
|
|
|
| |
Part Number |
Qty |
Description |
| IPMI |
AOC-SIMSO
AOC-SIMSO+ |
-
- |
IPMI 2.0 w/ Virtual Media Over LAN
IPMI 2.0 w/ Virtual Media + KVM Over LAN (CBL-0177L is required for dedicated LAN) |
| UIO Controller Card(s) |
- |
- |
Please refer to our UIO Add-on Card Table |
| Peripheral Drives |
DVM-TEAC-824B
|
1
|
TEAC 8x DVD, 24x CD, DVD-ROM Drive |
|
|
|
* For 1600MHz FSB CPUs only
**This memory modules are not tested yet |
|
